Surgical Scrub Sinks
Manufactured of the highest quality possible, Mac Medical delivers a full line of hands free, fully functional Surgical Scrub Sinks. Combining the best materials, components, and craftsmanship available, each sink is hand built to the customer’s specific need.
Knee Operated Surgical Scrub Sinks
The operation of these sinks is simple. Press the knee panel one time to activate water flow. Press again to stop flow. The soap panel works in a pumping fashion with soap being dispensed through a stainless steel spout located near the mixing valve. The base has been designed to accommodate gallon sized soap container storage behind the knee panels.
Infrared Operated Surgical Scrub Sinks
The infrared sensor is located on the front of each station and is activated by the user’s waist. There is a 2 second on/off delay for water flow. The sensor range is 12” to 14”. Both features combined eliminate activation by simply passing by. Optional knee operated or foot control soap pumps are available.
Deluxe Surgical Scrub Sinks
Built as a hybrid, these sinks have dual controls. Equipped with infrared operated water control as well as a manual bypass for knee operated water control. The main operation is via the infrared sensor located between the knee panels. The knee operation for water control is on standby as a backup. In addition the sink is also equipped with knee operated soap. (pictured below with features)
Our ES series scrub sinks were developed to be the answer to space and economical constraints. The ES series sinks have a smaller outside dimension but still have a deep basin to allow for a proper scrub. The operation of the ES sinks are the same as that of the SS series sinks but the features do vary.
ES Series Scrub Sink Standard Features:
- Deep sloping basin
- Adjustable thermostatic controlled pressure regulating mixing valve, one per station mounted under sink
- High mount swivel gooseneck spout with adjustable swivel spray aerator
- Flow control valve
- Backflow preventers
- Infrared sinks are equipped with a 24 volt plug in transformer
- Z-brackets (See specifications on rear panel for in-wall support)
- 304 stainless steel polished and ground to a #4 finish